Exposure to gallium arsenide nanoparticles in a research facility: a case study using molecular beam epitaxy.

We evaluated GaAs nanoparticle-concentrations in the air and on skin and surfaces in a research facility that produces thin films, and to monitored As in the urine of exposed worker. The survey was over a working week using a multi-level approach. Airborne personal monitoring was implemented using a miniature diffusion size classifier (DiSCMini) and IOM sampler. Environmental monitoring was conducted using the SKC Sioutas Cascade Impactor to evaluate dimensions and nature of particles collected. Surfaces contamination were assessed analyzing As and Ga in ghost wipes. Skin contamination was monitored using tape strips. As and Ga were analyzed in urines collected every day at the beginning and end of the shift. The greatest airborne exposure occurred during the cutting operations of the GaAs Sample (88883 np/cm3). The highest levels of contamination were found inside the hood (As max = 1418 ng/cm2) and on the laboratory floor (As max = 251 ng/cm2). The average concentration on the worker's skin at the end of the work shift (3.36 ng/cm2) was more than 14 times higher than before the start of the shift. In weekly urinary biomonitoring an average As concentration of 19.5 µg/L, which was above the Società Italiana Valori di Riferimento (SIVR) reference limit for the non-occupational population (2.0 - 15 µg/L), but below the ACGIH limit (30 µg/L). Overall, airborne monitoring, surface sampling, skin sampling, and biomonitoring of worker confirmed the exposure to As of workers. Systematic cleaning operations, hood implementation and correct PPE management are needed to improve worker protection.

Probing the effectiveness of barrier creams against human skin penetration of nickel powder.

OBJECTIVE: Barrier creams (BCs) are marketed as locally applied medical devices or cosmetic products to protect the skin from exposure to chemicals and irritants. Generally, the mechanism of action of such products is mainly due to the formation of a superficial thin film between the skin and the irritant or sensitizer, thus reducing or totally blocking the cutaneous penetration of such agents. Specifically, studies focusing on the effectiveness of commercial protective creams to prevent nickel cutaneous penetration are extremely scarce. The aim of the current work, therefore, is to evaluate the protective role of a commercially available barrier cream for nickel and compare the results with a simple moisturizing, following exposure to Ni powder. METHODS: Marketed BCs were evaluated and tested. Human skin absorption of Ni was studied in vitro using static Franz diffusion cells. RESULTS: Our results demonstrate that the application of both formulations caused a reduction of Ni inside the skin (8.00 ± 3.35 µg cm-2 for the barrier cream and 22.6 ± 12.6 µg cm-2 for the general moisturizing product), with the specialized barrier cream being statistically (p = 0.015) more efficient on forming a protective barrier, thus evidencing the importance of some ingredients in such formulations on the nickel dermal accumulation. CONCLUSIONS: The composition of the formulations based on film-forming or chelating agents may play an imperative role in reducing the cutaneous penetration of Ni.

OBJECTIF: Les crèmes de barrière (CB) sont commercialisées en tant que dispositifs médicaux ou produits cosmétiques appliqués localement pour protéger la peau contre l'exposition aux produits chimiques et irritants. En général, le mécanisme d'action de ces produits est principalement dû à la formation d'un film mince superficiel entre la peau et l'irritant ou le sensibilisant, réduisant ainsi ou bloquant totalement la pénétration cutanée de ces agents. Plus précisément, les études portant sur l'efficacité des crèmes protectrices commercialisées pour prévenir la pénétration cutanée du nickel sont extrêmement rares. L'objectif du projet en cours est donc d'évaluer le rôle protecteur d'une crème barrière disponible dans le commerce contre le nickel et de comparer les résultats à un simple hydratant après une exposition à la poudre de Ni. MÉTHODES: Des CB commercialisées ont été évaluées et testées. L'absorption cutanée du Ni dans la peau humaine a été étudiée in vitro à l'aide de cellules de diffusion statiques de Franz. RÉSULTATS: Nos résultats démontrent que l'application des deux formulations a entraîné une réduction du taux de Ni à l'intérieur de la peau (8,00 ± 3,35 µg·cm-2 pour la crème barrière et 22,6 ± 12,6 µg·cm-2 pour le produit hydratant ordinaire), la crème barrière spécialisée étant statistiquement (p = 0,015) plus efficace pour former une barrière protectrice, démontrant ainsi l'importance de certains ingrédients dans ces formulations sur l'accumulation dermique du nickel. CONCLUSIONS: La composition des formulations basées sur des agents de formation de film ou de chélation peut jouer un rôle nécessaire pour réduire la pénétration cutanée du Ni.

Reduced Tiara-like Palladium Complex for Suzuki Cross-Coupling Reactions.

The design of highly active and structurally well-defined catalysts has become a crucial issue for heterogeneous catalysed reactions while reducing the amount of catalyst employed. Beside conventional synthetic routes, the employment of polynuclear transition metal complexes as catalysts or catalyst precursors has progressively intercepted a growing interest. These well-defined species promise to deliver catalytic systems where a strict control on the nuclearity allows to improve the catalytic performance while reducing the active phase loading. This study describes the development of a highly active and reusable palladium-based catalyst on alumina (Pd8 /Al2 O3 ) for Suzuki cross-coupling reactions. An octanuclear tiara-like palladium complex was selected as active phase precursor to give isolated Pd-clusters of ca. 1 nm in size on Al2 O3 . The catalyst was thoroughly characterised by several complementary techniques to assess its structural and chemical nature. The high specific activity of the catalyst has allowed to carry out the cross-coupling reaction in 30 min using only 0.12 mol % of Pd loading under very mild and green reaction conditions. Screening of various substrates and selectivity tests, combined with recycling and benchmarking experiments, have been used to highlight the great potentialities of this new Pd8 /Al2 O3 catalyst.

Evaluating the role of protective creams on the cutaneous penetration of Ni nanoparticles.

There is an increase of application of Nickel in the form of nanoparticles (NiNPs) in several fields including modern metallurgy, bioengineering, and medicine. Such growth of the areas of application is actually accompanied with an increase of exposure to Nickel, thus an intensification of the negative effects, the most frequent being the allergic contact dermatitis. Indeed, due to their smaller size, and therefore their higher surface area, NiNPs can release more Ni ions compared to bulk material, that can penetrate and permeate through the skin. To reduce the Ni cutaneous penetration, barrier creams (BC) are applied on the skin surface. There is little information, however, on the efficiency of such commercial protective creams on decreasing Ni cutaneous penetration. For this reason, the objective of the current study was to investigate the protective role of one commercially available formulation for Ni (Nik-L-Block™ containing a chelating agent) and one moisturizing cream (Ceramol 311 basic cream without chelating agent), following exposure to NiNPs, using in vitro Franz cells, as well as the cytotoxicity of NiNPs in primary human dermal fibroblasts was studied. Our results demonstrated that although both tested formulations can decrease Ni accumulation in the skin (4.13 ± 1.74 µg/cm2 for Nik-L-Block™ and 7.14 ± 1.46 µg/cm2 for Ceramol 311 basic cream); there are significant differences between the two creams (p = 0.004). Based on the experimental evidence, we therefore conclude that the composition of such formulations has an imperative role for dermal uptake of Ni. Finally, NiNPs showed no cytotoxic effect on cultured human dermal fibroblasts after 24 and 72 h.

From Collection or Archaeological Finds? A Non-Destructive Analytical Approach to Distinguish between Two Sets of Bronze Coins of the Roman Empire.

This study stems from the need for numismatics to establish whether there may be relationships between a group of 103 bronze coins from the Roman era found in archaeological excavations on the Cesén Mountain (Treviso, Italy) and a group of 117 coins kept at the Museum of Natural History and Archaeology in Montebelluna (Treviso, Italy). The chemists were delivered six coins with neither pre-agreements nor further information on the origin of the coins. Therefore, the request was to hypothetically assign the coins to the two groups on the basis of similarities and differences in their surface composition. Only non-destructive analytical techniques were allowed to be used to characterize the surface of the six coins taken blindly from the two sets. The elemental analysis of each coins' surface was carried out by µ-XRF. To better observe the morphology of the coins' surfaces, SEM-EDS was used. Compounds covering the coins coming from both corrosion processes (patinas) and the deposition of soil encrustations were also analyzed by means of the FTIR-ATR technique. The molecular analysis confirmed the presence of silico-aluminate minerals on some coins, unequivocally indicating a provenance from clayey soil. Some soil samples, collected from the archaeological site of interest, were analyzed to verify whether the encrusted layer on coins could contain chemical components compatible with them. This result, together with the chemical and morphological investigations, led us to subdivide the six target coins into two groups. The first group is made up of two coins coming from the set of coins from excavation (found in the subsoil) and from the set from open air finds (coins found in the top layer of the soil). The second group is made up of four coins that are devoid of characteristics corresponding to exposure to soil contact for long periods of time and, moreover, their surface compounds could suggest a different provenance. The analytical results of this study made it possible to correctly assign all six coins to the two groups of finds and support numismatics, which was unconvinced in considering all coins to come from the same finding site only on the basis of archaeological documentations.

Cyclodipeptides: From Their Green Synthesis to Anti-Age Activity.

Cyclodipeptides (CDPs) or diketopiperazines (DKPs) are often found in nature and in foodstuff and beverages and have attracted great interest for their bioactivities, biocompatibility, and biodegradability. In the laboratory, they can be prepared by green procedures, such as microwave-assisted cyclization of linear dipeptides in water, as performed in this study. In particular, five CDPs were prepared and characterized by a variety of methods, including NMR and ESI-MS spectroscopies and single-crystal X-ray diffraction (XRD), and their cytocompatibility and anti-aging activity was tested in vitro, as well as their ability to penetrate the different layers of the skin. Although their mechanism of action remains to be elucidated, this proof-of-concept study lays the basis for their future use in anti-age cosmetic applications.

A Multi-Analytical Approach on Silver-Copper Coins of the Roman Empire to Elucidate the Economy of the 3rd Century A.D.

In this study, 160 silver-copper alloy denarii and antoniniani from the 3rd century A.D. were studied to obtain their overall chemical composition. The approach used for their characterisation is based on a combination of physical, chemical, and chemometric techniques. The aim is to identify and quantify major and trace elements in Roman silver-copper coins in order to assess changes in composition and to confirm the devaluation of the currency. After a first cataloguing step, µ-EDXRF and SEM-EDX techniques were performed to identify the elements on the coins' surface. A micro-destructive sampling method was employed on a representative sample of the coins to quantify the elements present in the bulk. The powder obtained from drilling 12 coins (keeping the two categories of coins separate) was dissolved in an acidic medium; heated and sonicated to facilitate dissolution; and then analysed by ICP-AES and ICP-MS. The two currencies had different average alloy percentages; in particular, the % difference of Ag was about 8%. The other elements were found in concentrations <1 wt%. Of these, the element highest in concentration were Pb and Sn, which is in agreement with the literature. The multivariate analysis performed on the data acquired revealed two groups of coins, corresponding to the two currencies.

Transdermal permeation of inorganic cerium salts in intact human skin.

The stratum corneum protects the body against external agents, such as metals, chemicals, and toxics. Although it is considered poorly permeable to them, comprising the major barrier to the permeation of such substances, it may become a relevant gate of entry for such molecules. Cerium (Ce) is a lanthanide that is widely used in catalytic, energy, biological and medicinal applications, owing to its intrinsic structural and unique redox properties. Cerium salts used to produce cerium oxide (CeO2) nanostructures can potentially come into contact with the skin and be absorbed following dermal exposure. The objective of this study was to investigate the percutaneous absorption of three inorganic Ce salts: cerium (III) chloride (CeCl3); cerium (III) nitrate (Ce(NO3)3) and ammonium cerium (IV) nitrate (Ce(NH4)2(NO3)6), which are commonly adopted for the synthesis of CeO2 using in vitro - ex vivo technique in Franz diffusion cells. The present work shows that Ce salts cannot permeate intact human skin, but they can penetrate significantly in the epidermis (up to 0.29 µg/cm2) and, to a lesser extent in dermis (up to 0.11 µg/cm2). Further studies are required to evaluate the potential effects of long-term exposure to Ce.

Assessment of dermal absorption of beryllium and copper contained in temple tips of eyeglasses.

Dermal exposure to hazardous substances such as chemicals, toxics, metallic items and other contaminants may present substantial danger for health. Beryllium (Be) is a hazardous metal, especially when inhaled and/or in direct contact with the skin, associated with chronic beryllium disease (CBD) and Be sensitization (BeS). The objective of this study was to investigate the percutaneous penetration of beryllium and copper contained in metallic items as eyeglass temple tips (specifically BrushCAST® Copper Beryllium Casting Alloys containing Be 0.35 < 2.85%; Cu 95.3-98.7%), using Franz diffusion cells. This work demonstrated that the total skin absorption of Cu was higher (8.86%) compared to Be (4.89%), which was expected based on the high percentage of Cu contained in the eyeglass temple tips. However, Be accumulated significantly in the epidermis and dermis (up to 0.461 µg/cm2) and, to a lesser extent, in the stratum corneum (up to 0.130 µg/cm2) with a flux of permeation of 3.52 ± 4.5 µg/cm2/hour and lag time of 2.3 ± 1.3 h, after cutaneous exposure of temple tip into 1.0 mL artificial sweat for 24 h. Our study highlights the importance of avoiding the use of Be alloys in items following long-term skin contact.

Percutaneous metals absorption following exposure to road dust powder.

The skin constitutes a protective barrier to external physical and chemical aggressions. Although it is constantly exposed to various xenobiotics, it is generally considered poorly permeable to them, as for example metal ions, becoming unfortunately an entry route of such substances. Metals may penetrate inside the skin inducing more or less local effects such as skin sensitization and potential metals diffusion into the bloodstream. The objective of the study was to investigate the percutaneous penetration of metals in vitro - ex vivo in Franz cell with intact as well damaged skin applying a road dust powder. Moreover, porcine and human skins were compared. This study demonstrated that, after the application of a road dust powder on the skin, metals can penetrate and permeate this cutaneous membrane. From this experimental analysis, in intact skin lead (Pb) achieved the highest skin absorption in both human and porcine skin, while skin absorption profile of cobalt (Co) was the lowest in human skin than the one in porcine model. The concentrations of Ni present in receiving solution were higher compared to other metals in all experiments performed. The present work, definitely shows that metals permeation through damaged skin is accelerated than intact skin, as a result of the weaker cutaneous barrier function. According to published data, pig skin appeared as a suitable model for human skin. Our results confirmed that skin absorption of metals can be relevant in environmental exposures.

Use of single particle ICP-MS to estimate silver nanoparticle penetration through baby porcine mucosa.

Children are potentially exposed to products that contain nanoparticles (NPs). In particular, silver NPs are commonly present both in products used by and around children, primarily due to their antibacterial properties. However, very few data are available regarding the ability of silver NPs to penetrate through the oral mucosa in children. In the present work, we used baby porcine buccal mucosa mounted on vertical Franz diffusion cells, as an in vitro model to investigate penetration of silver NPs (19 ± 5 nm). Permeability experiments were performed using pristine physiologically-relevant saline solution in the receiver chamber and known concentrations of NPs or ions in the donor chamber; conditions mimicked the in vivo physiological pH conditions. After physicochemical characterization of silver nanoparticles dispersed in physiological solution, we evaluated the passage of ions and NPs through the mucosa, using single particle inductively coupled plasma mass spectrometry. A flux of 4.1 ± 1.7 ng cm-2 min-1 and a lag time of 159 ± 17 min were observed through mucosa exposed to silver nanoparticles. The latter suggests nanoparticle penetration through the baby porcine mucosa and release Ag+ ions in the receptor fluid, as confirmed by computational model. Due to physiological similarity between human and pig membranes it is reasonable to assume that a trans-oral mucosa penetration could occur in children upon contact with silver nanoparticles.

A multidisciplinary study unveils the nature of a Roman ink of the I century AD.

A multi-instrumental approach combining highly sensitive Synchrotron Radiation-based techniques was used to provide information on the real composition of a dry black ink powder found in a bronze inkwell of the first century AD. The presence of Pb, Cu and Fe in the powder, revealed by XRF and ICP-OES data, leads to raise several hypotheses on their origin. The inkpot and its lid were also investigated by Hand-Held XRF, revealing a bronze alloy (Cu-Sn) with a certain amount of Fe and Pb. The lid was found to be particularly enriched in lead. XRPD, XAS and FTIR measurements showed a substantial presence of silicates and common clay minerals in the ink along with cerussite and malachite, Pb and Cu bearing-carbonates, respectively. These evidences support the hypothesis of an important contamination of the ink sample by the burial environment (soil) and the presence of degradation products of the bronze inkpot. The combined use of IR, Raman, and GC-MS evidenced that the black ink is mainly composed of amorphous carbon deriving from the combustion of organic material mixed with a natural binding agent, Arabic gum.

Antibacterial Electrospun Polycaprolactone Membranes Coated with Polysaccharides and Silver Nanoparticles for Guided Bone and Tissue Regeneration.

Electrospun polycaprolactone (PCL) membranes have been widely explored in the literature as a solution for several applications in tissue engineering and regenerative medicine. PCL hydrophobicity and its lack of bioactivity drastically limit its use in the medical field. To overcome these drawbacks, many promising strategies have been developed and proposed in the literature. In order to increase the bioactivity of electrospun PCL membranes designed for guided bone and tissue regeneration purposes, in the present work, the membranes were functionalized with a coating of bioactive lactose-modified chitosan (CTL). Since CTL can be used for the synthesis and stabilization of silver nanoparticles, a coating of this compound was employed here to provide antibacterial properties to the membranes. Scanning electron microscopy imaging revealed that the electrospinning process adopted here allowed us to obtain membranes with homogeneous fibers and without defects. Also, PCL membranes retained their mechanical properties after several weeks of aging in simulated body fluid, representing a valid support for cell growth and tissue development. CTL adsorption on membranes was investigated by fluorescence microscopy using fluorescein-labeled CTL, resulting in a homogeneous and slow release over time. Inductively coupled plasma-mass spectrometry was used to analyze the release of silver, which was shown to be stably bonded to the CTL coating and to be slowly released over time. The CTL coating improved MG63 osteoblast adhesion and proliferation on membranes. On the other hand, the presence of silver nanoparticles discouraged biofilm formation by Pseudomonas aeruginosa and Staphylococcus aureus without being cytotoxic. Overall, the stability and the biological and antibacterial properties make these membranes a valid and versatile material for applications in guided tissue regeneration and in other biomedical fields like wound healing.

Nanotechnology-Based Cisplatin Intracellular Delivery to Enhance Chemo-Sensitivity of Ovarian Cancer.

BACKGROUND: Platinum resistance is a major challenge in the management of ovarian cancer. Even low levels of acquired resistance at the cellular level lead to impaired response to cisplatin. In ovarian cancer intraperitoneal therapy, nanoparticle formulation can improve the cisplatin's pharmacokinetics and safety profile. PURPOSE: This work aimed to investigate the chemo-sensitivity of ovarian cancer SKOV3 cells upon short-term (72h) single treatment of cisplatin and cisplatin-loaded biodegradable nanoparticles (Cis-NP). The aim was then to determine the therapeutic properties of Cis-NP in vivo using a SKOV3-luc cells' xenograft model in mice. METHODS: Cell cytotoxicity was assessed after the exposure of the cell culture to cisplatin or Cis-NP. The effect of treatments on EMT and CSC-like phenotype was studied by analyzing a panel of markers by flow cytometry. Intracellular platinum concentration was determined by inductively coupled plasma mass spectrometry (ICS-MS), and gene expression was evaluated by RNAseq analysis. The efficacy of intraperitoneal chemotherapy was evaluated in a SKOV3-luc cells' xenograft model in mice, through a combination of bioluminescence imaging, histological, and immunohistochemical analyses. RESULTS: We observed in vitro that short-term treatment of cisplatin has a critical role in determining the potential induction of chemoresistance, and a nanotechnology-based drug delivery system can modulate it. The RNAseq analysis underlines a protective effect of nanoparticle system according to their ability to down-regulate several genes involved in chemoresistance, cell proliferation, and apoptosis. The highest intracellular platinum concentration obtained with Cis-NP treatment significantly improved the efficacy. Consistent with in vitro results, we found that Cis-NP treatment in vivo can significantly reduce tumor burden and aggressiveness compared to the free drug. CONCLUSION: Nanoparticle-mediated cisplatin delivery may serve as an intracellular depot impacting the cisplatin pharmacodynamic performance at cellular levels. These features may contribute to improving the drawbacks of conventional intraperitoneal therapy, and therefore will require further investigations in vivo.

Use of Cotton Textiles Coated by Ir(III) Tetrazole Complexes within Ceramic Silica Nanophases for Photo-Induced Self-Marker and Antibacterial Application.

This study was aimed at the production and characterization of coated cotton textiles with luminescent ceramic nanophases doped with cationic Ir(III) tetrazole complexes. We confirmed that SiO2 nanoparticles (NPs) do not affect the phosphorescent properties of the complexes that maintain their emission (610 and 490 nm). For the first time we transferred the luminescence feature from nanosol to textile surface, highlighting the advantages of using nanosilica as an encapsulating and stabilizing matrix. The optimized Ir@SiO2 suspensions were homogenously applied onto the cotton surface by dip-pad-dry-cure technique, as proved by the 2p-fluorescence microscope analysis. Once we verified the self-marker properties of the Ir(III) complex, we observed an excellent washing fastness of the coating with a very limited release. SiO2 in the washing water was quantified at maximum around 1.5 wt% and Ir below the inductively coupled plasma optical emission spectrometry (ICP-OES) detection limit of 1 ppm. A Franz cell test was used to evaluate any possible ex-vivo uptake of Ir@SiO2 nanoparticles across human skin tissues, showing that epidermis and dermis stop over 99% of Ir, implying a reduced impact on human health. The light-induced antimicrobial potential of the Ir@SiO2 were assessed toward both Gram(-) and Gram(+) bacteria. The results encouraged further developments of such functional textiles coated by self-markers and antibacterial active nanophases.

Trace elements in the estuarine systems of the Gulf of Trieste (northern Adriatic Sea): A chemometric approach to depict partitioning and behaviour of particulate, colloidal and truly dissolved fractions.

Estuaries are transitional water systems where the hydrodynamic processes governing water circulation actively influence suspended particle transport and deposition. In the estuarine mixing zone, the strong physico-chemical gradients resulting from the interaction between river freshwater and seawater may affect the distribution, mobility and fate of several potentially toxic compounds, among which trace elements are of major concern. Knowledge regarding the partitioning behaviour of trace elements would provide essential scientific support for the environmental management of estuaries. In this study, trace element occurrence and phase partitioning among suspended particulate matter, colloidal material and the truly dissolved fraction were investigated in the main Italian and Slovenian estuarine environments of the Gulf of Trieste (northern Adriatic Sea). Further information about the water quality at the river mouths was provided and, in addition to the traditional evaluation of single chemical parameters, a multi-way principal component analysis was employed in order to depict disparities among sampling sites, water layers and seasonal conditions with the final aim of evaluating trace element phase partitioning. Results indicated that the suspended particulate matter acts as the main effective vehicle for Cu, Cr, Fe, Ni and Pb, and enhanced adsorption processes resulted in elevated partitioning coefficients, especially for Fe and Pb. Although disparities occurred between sampling sites and seasons, trace elements showing affinity for the solid phase appeared to be partially bound to the colloidal material. Conversely, As and Cs prevailed in the truly dissolved fraction, especially in seawater and showed scarce affinity for both the suspended particles and colloids.

Cerium Oxide Nanoparticles Absorption through Intact and Damaged Human Skin.

Cerium oxide (CeO2) nanoparticles (NPs) are used in polishing products and absorbents, as promoters in wound healing, and as organopesticide decontaminants. While systemic bioaccumulation and organ toxicity has been described after inhalation, data on CeO2 NPs' transdermal permeation are lacking. Our study was an in vitro investigation of the permeation of 17-nm CeO2 NPs dispersed in synthetic sweat (1 g L-1) using excised human skin on Franz cells. Experiments were performed using intact and needle-abraded skin, separately. The average amount of Ce into intact and damaged skin samples was 3.64 ± 0.15 and 7.07 ± 0.78 µg cm-2, respectively (mean ± SD, p = 0.04). Ce concentration in the receiving solution was 2.0 ± 0.4 and 3.3 ± 0.7 ng cm-2 after 24 h (p = 0.008). The Ce content was higher in dermal layers of damaged skin compared to intact skin (2.93 ± 0.71 µg cm-2 and 0.39 ± 0.16 µg cm-2, respectively; p = 0.004). Our data showed a very low dermal absorption and transdermal permeation of cerium, providing a first indication of Ce skin uptake due to contact with CeO2.

Organotin compounds in touristic marinas of the northern Adriatic Sea: occurrence, speciation and potential recycling at the sediment-water interface.

Butyltin compound (BTC) contamination was evaluated in two north Adriatic marinas, San Rocco (Italy) and Lucija (Slovenia). BTC sedimentary concentrations (121 ± 46 and 352 ± 30 ng Sn g-1 in San Rocco and Lucija, respectively) evidenced the past use of antifouling paints, confirmed by the reduced tributyltin content (~ 46%) with respect to the sum of BTC. Elemental and organic carbon isotopic (δ13C) analyses of bulk sediments and its lipid and humic substances were performed in order to evaluate their role in BTC partitioning and preservation. The δ13C of sedimentary bulk and refractory organic matter suggested that diagenetic processes could play a role in the preservation or release of pollutants. No contamination was found in water collected from the benthic chamber and thus, fluxes at the sediment-water interface were not assessed, except for MBT efflux at Lucija (28.9 ng Sn m-2 day-1). Nevertheless, BTC concentrations in porewaters (up to 75 ng Sn l-1) and rather low sediment-porewater partitioning coefficients (Kd) with respect to the data reported in the literature would suggest a potential risk of the reintroduction of BTC into the water column at both sites: at Lucija, sedimentary contamination is high despite the greater Log Kd, whilst at San Rocco, the low BTC concentration is associated with a reduced sediment affinity.

Graphene-based materials do not impair physiology, gene expression and growth dynamics of the aeroterrestrial microalga Trebouxia gelatinosa.

The effects of two graphene-based materials (GBMs), few-layers graphene (FLG) and graphene oxide (GO), were studied in the aeroterrestrial green microalga Trebouxia gelatinosa. Algae were subjected to short- and long-term exposure to GBMs at 0.01, 1 and 50 µg mL - 1. GBMs internalization after short-term exposures was investigated with confocal microscopy, Raman spectroscopy and TEM. Potential negative effects of GBMs, compared to the oxidative stress induced by H2O2, were verified by analyzing chlorophyl a fluorescence (ChlaF), expression of stress-related genes and membrane integrity. Effects of up to 4-week-long exposures were assessed analyzing growth dynamics, ChlaF and photosynthetic pigments. GBMs were not observed in cells but FLG was detected at the interface between the cell wall and plasma membrane, whereas GO was observed adherent to the external wall surface. FLG caused the down-regulation of the HSP70-1 gene, with the protein levels remaining stable, whereas GO had no effect. In comparison, H2O2 produced dose- and time-dependent effects on ChlaF, gene expression and HSP70 protein level. Long-term exposures to GBMs did not affect growth dynamics, ChlaF or photosynthetic pigment contents, indicating that the few observed short-term effects were not dangerous on the long-term. Results suggest that interactions between FLG and plasma membrane were harmless, activating a down-regulation of the HSP70-1 gene similar to that induced by H2O2. Our work shows that studying GBMs effects on non-model organisms is important since the results of model green microalgae are not representative of the whole taxonomic group.

In vitro transdermal absorption of Al2O3 nanoparticles.

Dermal exposure to Aluminium nanoparticles (AlNPs) can occur in occupationally- and non occupationally exposed- population, due to the use of Al salts-based antiperspirants. No AlNPs transdermal permeation data exists. Our study investigated in vitro the permeation of 30-60 nm Al2O3NPs dispersed in synthetic sweat (20 g/L) using excised human skin on Franz cells. Experiments were performed using intact (experiment 1) and needle-abraded skin (experiment 2). After 24 h traces of Al were detectable in receiving solution of exposed cells (35.0 ±â€¯6.0 ng/cm2 for intact and 88.5 ±â€¯34.2 ng/cm2 for damaged skin, mean and SD) and in blank cells (36.3 ±â€¯7.0 ng/cm2), without statistical significance (p = 0.08, Mann-Whitney test). The average amount of Al into intact and damaged skin samples was 3.96 ±â€¯0.20 µg/cm2 for intact and 4.36 ±â€¯0.47 µg/cm2 for damaged skin (p = 0.08). Al content was similar in epidermal and dermal layers of intact and damaged skin (1.95 ±â€¯0.13 µg/cm2 and 2.31 ±â€¯0.12 µg/cm2 epidermal, 2.01 ±â€¯0.25 µg/cm2 and 2.05 ±â€¯0.35 µg/cm2 dermal). Al is a trace element in human body and the amount found in receiving solutions could be due as background impurity. This data suggest a reassuring transdermal permeation profile for Al2O3NPs.